equipment$13–25used in 1 side quest
Screen printing frame (8x10 inch)
Wooden or aluminum frame stretched with fine mesh fabric. Holds your photo emulsion stencil and spreads ink evenly across fabric when you pull a squeegee over it.
What to look for
- 1110 or 156 mesh count for general designs (lower = thicker ink layer)
- 2Frame corner joints that won't separate when wet
- 3Mesh stretched drum-tight with no sag in the center
- 48x10" prints designs up to about 6x8" comfortably
Skip
- Pre-owned frames with dried emulsion still in the mesh
- Frames with visible mesh wrinkles or loose spots
Used for: Making custom street sign prints · Printing band shirts and tote bags · Creating small-batch fabric patches · Photo emulsion stencil work
Side quests that use it
Pick the adventure first; the gear follows.
